Part Number Hot Search : 
10150 11201 BCM5836 B2567 A2810 HAT1023R S8430 TA8420
Product Description
Full Text Search
 

To Download 855737 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 Data Sheet
Features
* * * * * * For broadband applications Typical 3dB bandwidth of 1 MHz High attenuation Single-ended operation Ceramic Surface Mount Package (SMP) Replaces Sawtek P/N 851544 (BW 3dB=1 MHz)
Part Number 855737 70 MHz SAW Filter
*
Package
Surface Mount 24.60 x 9.00 x 2.31 mm
Pin Configuration
Bottom View
12345
2.31 NOM. 2.62 MAX. 1.02 24.6 1.80 1.91
10 9 8 7 6
9.00
R0.5 2.31
3.53 x 4.83
1.02
Pin No. 1 5 6 10 2,3,4 7,8,9
Description Input return Output Output return Input Case Ground Case Ground
Dimensions shown are nominal in millimeters All tolerances are 0.15mm except overall length 0.20mm and width +0.13/-0.20mm Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0m, over a 2 - 6m Ni plating
Subject to change or obsolescence without notice
Rev A
27-Jun-2002
Page 1 of 5
Data Sheet
Operating Temperature Range: (2) 0 to +70 oC
Part Number 855737 70 MHz SAW Filter
Electrical Specifications (1)
Parameter (3)
Center Frequency Minimum Insertion Loss Lower 1 dB Bandedge (4) Upper 1 dB Bandedge Lower 3 dB Bandedge (4) Upper 3 dB Bandedge Lower 40 dB Bandedge (4) Upper 40 dB Bandedge Amplitude Variation 69.54 - 70.46 MHz Phase Linearity 69.54 - 70.46 MHz Group Delay Variation 69.54 - 70.46 MHz Relative Attenuation (4) 10 - 68.5 MHz 68.5 - 68.91 MHz 71.09 - 75 MHz 75 - 110 MHz 110 - 122 MHz 122 - 135 MHz 135 - 200 MHz Source Impedance (5) Load Impedance (5) Substrate Material Notes:
1. 2. 3. 4. 5.
Minimum
70.46 70.59 68.91 48 40 40 50 35 36 50 -
Typical
70 22.2 69.47 70.50 69.37 70.62 68.95 71.06 0.55 2.2 100 53 45 45 55 37 40 65 50 50 Quartz
Maximum
23 69.54 69.41 71.09 1 5 190 -
Unit
MHz dB MHz MHz MHz MHz MHz MHz dB p-p deg p-p nsec dB dB dB dB dB dB dB -
All specifications are based on the test circuit shown below In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances All attenuation measurements are measured relative to minimum insertion loss This is the optimum impedance in order to achieve the performance shown
Test Circuit:
Actual matching values may vary due to PCB layout and parasitics
220nH 7pF 820nH 10 5 50 1,2,3,4 6,7,8,9
50 Single-ended
50
Subject to change or obsolescence without notice
Rev A
27-Jun-2002
Page 2 of 5
Data Sheet
Part Number 855737 70 MHz SAW Filter
Typical Performance (at +25oC)
Subject to change or obsolescence without notice
Rev A
27-Jun-2002
Page 3 of 5
Data Sheet
Matching Schematic
220nH
Part Number 855737 70 MHz SAW Filter
7pF 820nH 10 5 50 1,2,3,4 6,7,8,9
50 Single-ended
50
Marking
PCB Footprint
8.84
SAWTEK 855737 XXXXXX
ID dot Date code 1.95 1.22 .69
9.19
Date code is the day of the current year in Julian format, last digit of the year, and hour of the day
This footprint represents a recommendation only Dimensions shown are nominal in millimeters
4.0
Tape and Reel
2.7 44.8 O330 ID dot
0.36 2.0 O1.5 A 1.75 20.2 40.4 25.6 44.0
O102
O20.2 O13.0
2.0
Direction of travel
0.20 2.6 Section A-A 9.39 12.0 R0.75 O1.5 A
Dimensions shown are nominal in millimeters Packaging quantity: 1000 units/reel
Subject to change or obsolescence without notice
Rev A
27-Jun-2002
Page 4 of 5
Data Sheet
Maximum Ratings
Parameter
Operating Temperature Range Storage Temperature Range
Part Number 855737 70 MHz SAW Filter
Symbol
T Tstg
Minimum
0 -40
Maximum
+70 +85
Unit
o o
C C
Warnings
* * Electrostatic Sensitive Device (ESD) Avoid ultrasonic exposure
Links to Additional Technical Information
PCB Layout Tips S-Parameters Qualification Flowchart Soldering Profile Other Technical Information
Contact Information
PO Box 609501 Orlando, FL 32860-9501 USA
Subject to change or obsolescence without notice
Phone: +1 (407) 886-8860 Fax: +1 (407) 886-7061 Email: custservice@sawtek.com Web: www.sawtek.com
Rev A
Or contact one of our worldwide network of sales offices, representatives or distributors
27-Jun-2002
Page 5 of 5


▲Up To Search▲   

 
Price & Availability of 855737

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X